The free diy home improvement guide with answers to your questions on a wide range of do it yourself projects.


Saws - power and hand 2

Saws - power and hand 1

Power Saws

Power saws allow you to make accurate cuts with a lot less effort than with hand saws. They can be guided with battens or fences to ensure straight cuts even across large boards.

As with all power tools, follow the manufacturers' safety instructions, and unplug the saw when not in use. Wear safety goggles to prorect your eyes and , if the machine is noisy, ear defenders.

Make sure that the blade is clear of any obstructions - particularly underneath the wood being cut, and keep the electrical lead well out of the way.

Circular saws use a motor to drive a round blade at high speeds. The saw teeth protrude through a slot in the bottom plate of the tool and can be raised, lowered and tilted from side to side.

Saw tables are also available so that the portable saw can be bolted underneath to form a small saw bench.

Straight cuts across timber and boards

Cramp a timber batten securely across the timber at right angles and push the saw firmly along its edge to make the cut. For cuts close to and parallel to the edge of a board, use the side fence. Align the blade with the waste side of the marked cut line and adjust the fence to run along the edge of the timber.

Circular saws: What to look for

Powerful motor for easy cutting
Thick sole plate for rigidity
TCT (Tungsten Carbide Tipped) blade with at least a 46mm (1 7/8th in) depth of cut
Comfortable grip and good balance
Long guide fence


Jigsaws have a smaller motor than circular saws and the power is used to move the thin straight blades in an up and down motion to saw through the material for shaped cuts. The small blade size allows the tool to cut curves and intricate shapes and to remove waste from the middle of a board by drilling a starter hole and inserting the blade.

The bottom plate of the saw tilts to allow angled cuts and some jigsaws also have a scrolling action which allows the blade to be turned without turning the whole tool. As for all power equipment, buy the most powerful motor you can afford so the tool will cope with larger projects in the future.

Generally, jigsaws are safe provided you follow the manufacturers' instructions. Make sure the protuding blade under the workpiece is clear of obstructions and keep the electrical lead well out of the way. Also make sure that the wood is firmly fixed so that it doesn't judder as the saw is used.

Blade types

These vary according to the type of cut to be made and the material to be sawn. Thinner blades can make more acute angles and tighter curves.

Cutting an irregular shape

Secure the board to a bench and follow the cut line with the jigsaw, working at reduced speed for intricate shapes. To cut a circle, fix an accessory called a trammel bar to the sole plate of the saw or attach a straight timber batten with a nail driven through the other end into the centre of the marked circle.. With the saw against the end of the batten, pivot the batten around the nail to cut a circle.

Jigsaws: What to look for

High power motor
Variable speed for use in metals and plastics
Large depth of cut
Scroll action for efficient cutting
Comfortable handle shape
Tool free blade-changing for convenience

Decorative CovingJust LeadRatedPeopleOeco Garden OfficesLoft ShopG L Smith & SonsQuality Timber Doors