Hawksmoor lawn mowers are renowned for their dependability and durability. However, like all mechanical devices, they can sometimes fail to start.. Here are some potential reasons your Hawksmoor mower isn’t starting, along with some solutions.
1. Empty or Contaminated Fuel Tank
Before anything else, check the fuel level in your mower. It may seem simple, but you’d be surprised how often an empty tank is the culprit. Refill it if it’s low. Also, if the fuel has been sitting in the tank for a long time, it may have become stale or contaminated, which could prevent the mower from starting. In this case, drain the old fuel and refill with fresh fuel.
2. Dirty or Clogged Air Filter
A clogged air filter can limit the amount of air reaching the carburetor, making the fuel/air mixture too “rich” and preventing the mower from starting. Remove the filter and clean it if it’s reusable, or replace it if it’s disposable.
3. Spark Plug Issues
A faulty or dirty spark plug is another common reason a mower might fail to start. Remove the spark plug and inspect it. If it’s dirty, clean it with a wire brush and replace it. If it’s damaged or worn out, it will need to be replaced.
4. Faulty Carburetor
If your mower has been sitting idle for a while, the carburetor might be clogged with residual fuel that has turned into a sticky varnish. This can prevent fuel from reaching the engine. In this case, the carburetor will need to be cleaned or replaced.
5. Starter Cord and Recoil Spring
If the starter cord is not retracting properly, or if the recoil spring is broken, it can prevent the engine from getting the ‘kick’ it needs to start. In this case, you might need to replace the starter cord or the recoil spring.
6. Dead Battery (for electric start models)
If you have an electric start model and it’s not starting, the battery might be dead or low on charge. Check the battery connections to make sure they’re secure and free of corrosion. If they are, you might need to recharge or replace the battery.
7. Safety Switches
Most modern lawn mowers have safety switches that prevent the mower from starting if everything is not in the right place. For example, there might be a switch that prevents the mower from starting if the handle is not held down, or if the mower deck is not properly attached. Check the owner’s manual to find out where these switches are on your mower and make sure they’re all in the correct position.
If none of these solutions work, then it’s probably best to take your mower to a professional. They’ll have the tools and expertise to diagnose and fix the problem. Don’t let a non-starting mower get you down – with a bit of patience and troubleshooting, you’ll likely have it back up and running in no time.